Armor plate Bronyx Medium 5th class

The BRONYX Medium Level IV Ballistic Plate is designed for individual configuration of plate carriers and body armor systems. This model is available in Medium (M) size, measures 250 × 305 mm, and weighs 2.49 kg. The price listed on the product page is for one ballistic plate. The composite armor plate is constructed from silicon carbide (SiC) and Ultra-High-Molecular-Weight Polyethylene (UHMWPE). It is certified to DSTU 8782:2018 Protection Class 5 and is rated to stop the specified 7.62 × 39 mm armor-piercing incendiary (API) and 7.62 × 54 mm LPS threats. The Shooter's Cut profile and 3D Multi-Curved design improve fit while preserving shoulder mobility.   

Advantages of the BRONYX Medium Ballistic Plate

The single-plate configuration is suitable for assembling a new armor system, replacing a damaged plate, or purchasing front and rear plates separately. Users can order the exact number of plates required for their plate carrier configuration.   

The Medium (M) size is one of the most common ballistic plate formats. Its 250 × 305 mm dimensions are compatible with many Medium-size plate carriers, although the internal plate pocket should always be measured before purchase.

Key advantages

• Protection Class 5 certified to DSTU 8782:2018;
• composite construction using SiC ceramic and UHMWPE;
• protection against the specified armor-piercing incendiary ammunition;
• Medium size, 250 × 305 mm;
• weight of 2.49 kg;
• Shooter's Cut profile;
• 3D Multi-Curved anatomical shape;
• sold individually;
• manufactured in Ukraine.

A single plate may be used to replace a damaged or expired armor insert of the same size. Complete front and rear torso protection generally requires two compatible plates. When combining plates from different production batches, always verify that the protection level, dimensions, thickness, and profile match.

Protection Class 5 Certified to DSTU 8782:2018

The BRONYX ballistic plate complies with Protection Class 5 under DSTU 8782:2018. According to the manufacturer, certification testing was performed by an accredited laboratory at a distance of 10 meters. The plate is rated to withstand three impacts from each of the specified ammunition types.   

The certified protection includes:

• 62 × 39 mm API (57-BZ-231);
• 62 × 54 mm LPS (57-N-232s);
• lower threat levels defined by DSTU 8782:2018;
• ballistic fragments;
• shrapnel and secondary projectiles;
• ricochets within the manufacturer's certified performance parameters.

A copy of the official test report is available upon request. The report allows buyers to verify the test conditions, ammunition used, and recorded results. The markings on the delivered plate should be compared with the information contained in the certification documentation.

Ballistic Testing

Multiple-hit testing evaluates the ability of the armor plate to maintain its protective performance after localized damage. According to the manufacturer, the BRONYX plate withstands three impacts from both 57-BZ-231 and 57-N-232s projectiles fired from a distance of 10 meters.   

These results apply only to the specified laboratory conditions. Actual ballistic performance depends on factors such as projectile velocity, engagement distance, angle of impact, spacing between impacts, and the condition of the armor plate. Certification data should not be interpreted as protection against every 7.62 mm projectile.

Any plate that has sustained a ballistic impact must be removed from service. The ceramic strike face is permanently damaged around the impact point, and the protective characteristics of the affected area are altered. Further evaluation should be carried out by a qualified specialist.

Composite Construction: Silicon Carbide and UHMWPE

The BRONYX plate features a multi-layer composite structure in which the ceramic and polyethylene components perform different protective functions. The strike face consists of silicon carbide (SiC) ceramic, while the backing layer is manufactured from compressed UHMWPE.   

During ballistic impact:

1. The SiC ceramic receives the initial projectile strike.
2. The ceramic layer disrupts and fractures the penetrating core.
3. The UHMWPE backing captures residual projectile and ceramic fragments.
4. The polyethylene layer distributes the remaining impact energy over a larger surface.
5. When installed, a trauma pad further reduces behind-armor blunt force.

The ballistic performance depends on the integrity of the entire composite structure. Dropping the plate onto a hard surface may create hidden fractures within the ceramic layer. Following any severe mechanical impact, the plate should be inspected and evaluated if damage is suspected.

Medium Size for Plate Carriers

The BRONYX plate measures 250 × 305 mm. According to the manufacturer, the Medium size is recommended for users with a chest circumference of up to 110 cm (±5 cm) and is compatible with many Medium-size plate carriers.   

A size label alone does not guarantee compatibility. Internal pocket dimensions, upper corner geometry, and allowable plate thickness vary between manufacturers.

Before ordering, verify:

• internal pocket width;
• pocket height;
• maximum allowable plate thickness;
• upper pocket profile;
• available space when using a trauma pad;
• lower retention flap coverage;
• shoulder strap adjustment range.

The plate should fit fully inside the pocket and remain securely positioned. After installation, verify proper placement while walking, bending, and squatting.

Shooter's Cut Profile

The Shooter's Cut profile features beveled upper corners that create additional clearance around the shoulders. This design improves arm movement, weapon handling, and compatibility with modern tactical equipment.  

Protective coverage depends on both the plate dimensions and its correct positioning. The upper edge should sit at the recommended anatomical height. Positioning the plate too low reduces protection for the upper chest.

3D Multi-Curved Design

The plate incorporates a 3D Multi-Curved anatomical profile that follows the natural contours of the chest. This design distributes pressure more evenly and allows the plate to fit closer to the body with reduced bulk.   

Correct orientation is identified by the manufacturer's front and back markings. The plate must never be installed backwards. After installation, adjust the plate carrier to accommodate both the curvature and thickness of the armor.

Single Plate or Complete Set?

The listed price applies to one BRONYX Medium ballistic plate. This purchasing option is convenient when replacing a single damaged plate, assembling a custom armor configuration, or purchasing the second plate separately.   

A single plate may be used for:

• front plate carrier installation;
• replacement of a damaged plate;
• complementing an existing plate;
• building a matching two-plate set;
• keeping a spare plate of the same size.

Two plates are required to equip both the front and rear plate pockets. A complete pair weighs 4.98 kg. Both plates should match in protection level, size, profile, and construction.

Plate Weight

Each BRONYX Medium plate weighs 2.49 kg. When calculating the total equipment load, include the weight of the plate carrier, the second plate, trauma pads, side armor, and all attached pouches. A complete two-plate configuration weighs 4.98 kg before additional equipment is added.   

Specifications

• weight of one plate: 2.49 kg;
• weight of two plates: 4.98 kg;
• size: Medium;
• dimensions: 250 × 305 mm;
• recommended chest circumference: up to 110 cm (±5 cm);
• profile: Shooter's Cut;
• curvature: 3D Multi-Curved;
• quantity: one plate.

The plate carrier should be adjusted only after all protective components have been installed. Balanced front and rear weight distribution improves stability during movement. Padded shoulder straps help distribute the overall load more comfortably.

Why Use a Trauma Pad?

If the plate carrier does not include an integrated trauma pad, the manufacturer recommends installing a dedicated trauma pad between the rear surface of the plate and the body. The insert helps reduce behind-armor blunt force caused by high-energy projectile impacts.   

This is particularly relevant for threats such as 7.62 × 54 mm LPS. Even when the projectile is successfully stopped, the rear surface of the armor plate may deform and transfer significant energy to the torso. Trauma pads should match both the plate dimensions and the available internal space of the plate carrier.

Inspection and Storage

Ceramic ballistic plates should be inspected regularly. The outer cover must remain intact, the plate should retain its original shape, and all markings, serial numbers, and manufacturing information must remain legible.   

During inspection, check for:

• tears or punctures in the outer cover;
• damage along the edges or beveled corners;
• signs of heavy impact;
• deformation;
• material delamination;
• manufacturing date and service life;
• consistency between product markings and the test report.

Store the plate according to the manufacturer's temperature and humidity recommendations. Avoid placing heavy objects on top of the plate or dropping it onto hard surfaces. Any plate that has sustained ballistic impact, severe mechanical shock, or visible damage must be removed from service.

Technical Specifications

The BRONYX Medium ballistic plate is sold individually and is designed for compatible 250 × 305 mm plate pockets. Before ordering, compare the plate dimensions with your plate carrier's internal measurements.   

Specifications:

• Brand: BRONYX;
• Product type: ballistic plate;
• Quantity: 1 piece;
• Protection level: Class 5;
• Standard: DSTU 8782:2018;
• Materials: silicon carbide (SiC) and UHMWPE;
• Size: Medium (M);
• Dimensions: 250 × 305 mm;
• Weight: 2.49 kg;
• Recommended chest circumference: up to 110 cm (±5 cm);
• Profile: Shooter's Cut;
• Curvature: 3D Multi-Curved;
• Country of manufacture: Ukraine.

The BRONYX Medium ballistic plate provides DSTU 8782:2018 Class 5 protection and is supplied individually. Its combination of SiC ceramic, UHMWPE, Shooter's Cut geometry, and 3D Multi-Curved profile delivers an anatomical fit in compatible plate carriers. Before purchasing, verify that the 250 × 305 mm dimensions match your carrier and consider the 2.49 kg weight when configuring your equipment.

Why Buy the BRONYX Medium Ballistic Plate from TacMed?

At TacMed, you can purchase a single BRONYX Medium Class 5 ballistic plate for assembling or upgrading your protective equipment. The product page includes current pricing, technical specifications, and ordering information. You can also confirm compatibility with your specific plate carrier and request the ballistic test report if required. Delivery is available throughout Ukraine. The TacMed catalog also includes matching ballistic plates, plate carriers, trauma pads, medical pouches, and Individual First Aid Kits (IFAKs).