2pic Armor plate Bronyx 3rd class Size L

The BRONYX Large set contains two lightweight protective plates rated at level 3 according to DSTU 8782:2018. The model is made from ultra-high-molecular-weight polyethylene and is designed for protective vests and carriers with compartments measuring 260 × 330 mm. Each protective component weighs 1.58 kg, giving the pair a total weight of 3.16 kg. The plates feature a Shooter’s Cut shape and an anatomical 3D Multi Curved profile. This geometry provides a closer fit to the torso, distributes the load, and leaves sufficient space for movement around the shoulders. Size L is recommended for a chest circumference of 111-118 cm.

Advantages of BRONYX Polyethylene Protective Plates

Ultra-high-molecular-weight polyethylene combines low weight with the protective properties required for the stated level. Compared with many ceramic models of a similar size, polyethylene plates place less load on the shoulders, back, and carrier cummerbunds.

Weight becomes particularly noticeable during extended use. Lighter primary protective components leave more carrying capacity for a first-aid kit, communication devices, water, and other equipment.

The main advantages of the set include:

• two protective plates in one package;
• protection level 3 according to DSTU 8782:2018;
• UHMWPE construction;
• weight of one plate: 1.58 kg;
• total set weight: 3.16 kg;
• anatomical 3D Multi Curved profile;
• angled Shooter’s Cut upper corners;
• dimensions: 260 × 330 mm;
• manufactured in Ukraine.

The set fills the front and rear compartments of a compatible carrier. Matching specifications simplify system adjustment and distribute weight evenly between the front and rear sections of the torso. Check the markings on each protective component before use.

Protection Level 3 According to DSTU 8782:2018

BRONYX plates are rated at protection level 3 according to the Ukrainian DSTU 8782:2018 standard. Based on the stated test results, the model is designed to resist 5.45 × 39 mm PS 7N6 and 7.62 × 39 mm PS 57-N-231 test projectiles.

The stated protection covers:

• 45 × 39 mm PS, index 7N6;
• 62 × 39 mm PS, index 57-N-231;
• fragments;
• dispersed fragments;
• secondary and deflected elements within the specifications stated by the manufacturer.

The protection level should be assessed according to the markings, certification documents, and testing method for the specific model. Performance under real conditions depends on the impact type, velocity, distance, angle, and plate condition. After an impact or severe mechanical load, the protective component should be removed from service and professionally assessed.

UHMWPE Protective Plates

UHMWPE consists of high-strength polyethylene fibers formed into a multilayer structure. During impact, the material distributes energy across its surface and retains the impacting element within the parameters of the stated protection level. Polyethylene construction also resists corrosion and has a lower density than metal-based materials.

BRONYX Large belongs to the brand’s lightweight rigid protective component range. At 1.58 kg in size L, each plate helps reduce the total equipment load, especially when front and rear plates are used together.

Polyethylene plates have several operating features:

• low weight for the 260 × 330 mm size;
• no metal base;
• multilayer protective construction;
• resistance to corrosion;
• compatibility with carriers of the corresponding format;
• thickness of 23-24 mm.

Protect the plate from open flames, prolonged heating, and conditions outside the manufacturer’s specified temperature range. Damage to the outer coating, delamination, or changes in geometry require inspection. Storage conditions and permitted service life are defined in the manufacturer’s documentation.

Size L for L/XL Carriers

Each plate measures 260 × 330 mm. The model is intended for L or L/XL carriers with internal compartments supporting these dimensions. The protective component is 23-24 mm thick, which must also be considered when checking compatibility.

The recommended chest circumference for size L is 111-118 cm. This measurement provides an initial size reference, while the required coverage depends on the user’s anatomy and the fit of the specific carrier.

Before ordering, check:

• internal compartment width;
• height of the protective plate pocket;
• permitted component thickness;
• shape of the upper compartment section;
• reliability of the lower flap;
• adjustment range of the shoulder straps and cummerbunds.

The plate should fit closely inside the pocket and remain at the set height during movement. The lower flap must cover the protective component completely and fasten securely. Final compatibility depends on the internal compartment dimensions because L/XL sizing varies between manufacturers.

Shooter’s Cut Shape

The upper corners of the protective plate have the angled Shooter’s Cut shape. These cutouts provide more space around the shoulder joints, simplify forward arm movement, and support equipment handling. The geometry also reduces contact between the plate edges and the carrier shoulder straps.

Shooter’s Cut suits active use, training, and extended wear. Coverage depends on the exact position of the plate against the torso. After installation, adjust its height and check arm mobility while wearing the complete equipment set.

Anatomical 3D Multi Curved Profile

BRONYX Large has multidirectional curvature identified by the manufacturer as 3D Multi Curved. The plate surface follows the chest contour more closely and distributes contact pressure. This affects protective vest fit during walking, bending, and prolonged use in one position.

The anatomical profile positions the protective component closer to the torso. The carrier projects less at the front and remains more stable during movement. Proper plate height and cummerbund tension are required to achieve this fit.

BRONYX Set Weight

One plate weighs 1.58 kg, while the pair weighs 3.16 kg. This figure helps calculate the total weight of the protective setup, including the carrier, pouches, and other components. Side inserts should also be included in the calculation when they form part of the planned configuration.

Weight and size parameters:

• weight of one plate: 1.58 kg;
• weight of two plates: 3.16 kg;
• package quantity: 2;
• size: L;
• dimensions of one plate: 260 × 330 mm;
• thickness: 23-24 mm;
• recommended chest circumference: 111-118 cm.

The low set weight reduces the load compared with heavier protective components of the same format. After installing the plates, adjust the shoulder straps and cummerbunds. Weight should be distributed evenly between the front and rear sections.

When Is an Additional Cushioning Pad Required?

The manufacturer recommends an additional cushioning pad when the protective vest cover or carrier lacks built-in padding. This component sits between the protective plate and the wearer and helps reduce the effect of backface deformation.

A cushioning pad may also improve the fit of the rigid plate and distribute pressure across the torso. Its thickness must be considered when checking the capacity of the internal compartment. After installing the plate and pad, the lower flap must close completely.

How to Install a Pair of Protective Plates in a Carrier

One plate is installed in the front compartment and the other in the rear compartment. The orientation of each component is determined by its shape, curvature, and manufacturer markings. The angled Shooter’s Cut corners must remain at the top.

Installation procedure:

1. Check the plates for damage and confirm that the markings are legible.
2. Identify the front and rear surfaces.
3. Insert the first plate into the front compartment.
4. Install the second plate in the rear pocket.
5. Secure the lower flaps completely.
6. Adjust the height with the shoulder straps.
7. Set the cummerbund tension.
8. Check the fit during movement.

Complete the adjustment with the pouches and other equipment intended for the carrier. Both plates should remain at the same anatomical height. After several minutes of active movement, check the flap and strap positions again.

Technical Specifications

BRONYX Large is supplied as a pair for the front and rear carrier compartments. Compare every dimension with the specifications of the particular carrier before ordering.

Main specifications:

• brand: BRONYX;
• product type: protective plate set;
• quantity: 2;
• protection level: 3;
• standard: DSTU 8782:2018;
• material: UHMWPE;
• size: L;
• dimensions: 260 × 330 mm;
• thickness: 23-24 mm;
• weight of one plate: 1.58 kg;
• total pair weight: 3.16 kg;
• recommended chest circumference: 111-118 cm;
• shape: Shooter’s Cut;
• anatomical profile: 3D Multi Curved;
• country of manufacture: Ukraine.

The BRONYX Large set contains two level 3 protective plates rated according to DSTU 8782:2018 for the front and rear compartments of a carrier. The UHMWPE plates feature a Shooter’s Cut shape, anatomical 3D Multi Curved profile, and a total weight of 3.16 kg. Before ordering, confirm that the 260 × 330 mm dimensions and 23-24 mm thickness are compatible with the selected carrier.

Why Buy a Pair of BRONYX Protective Plates from TacMed?

The TacMed online store offers the BRONYX level 3 set containing two size L plates. The product page provides the current price, availability, and delivery terms. Customers can confirm compatibility with a particular carrier before ordering. Delivery is available to Kyiv, Lviv, Odesa, Kharkiv, Dnipro, Zaporizhzhia, Vinnytsia, Poltava, Cherkasy, Zhytomyr, Chernihiv, Rivne, Lutsk, Ternopil, Ivano-Frankivsk, Uzhhorod, Chernivtsi, Khmelnytskyi, Kropyvnytskyi, Mykolaiv, Kherson, and other cities across Ukraine. The TacMed catalog also includes compatible carriers, cushioning pads, medical pouches, and ready-made IFAK kits.