2pic Armor plate Bronyx 3rd class Size M

The BRONYX set includes two polyethylene protective plates rated Class 3 under DSTU 8782:2018. Each plate measures 250 × 300 mm, is 23–24 mm thick, and weighs 1.42 kg. The pair weighs 2.84 kg in total. The protective elements are made from ultra-high-molecular-weight polyethylene (UHMWPE). This material makes it possible to produce lightweight rigid plates for extended wear in a plate carrier or protective vest. The angled upper corners and 3D Multi Curved anatomical shape support a comfortable fit and free shoulder movement.

Advantages of Lightweight BRONYX Protective Plates

The weight of protective gear affects mobility, endurance, and the total equipment load. A set of two BRONYX plates adds 2.84 kg, leaving more capacity for a first aid kit, water, communications equipment, and other gear.

Size M, measuring 25 × 30 cm, fits many standard plate carriers. The recommended chest circumference is up to 110 cm, with an approximate tolerance of ±5 cm.

Key benefits of the set:

• two protective plates in one set;
• Class 3 under DSTU 8782:2018;
• UHMWPE construction;
• each plate weighs 1.42 kg;
• the pair weighs 2.84 kg in total;
• dimensions: 250 × 300 mm;
• thickness: 23–24 mm;
• angled upper corners;
• 3D Multi Curved shape;
• manufactured in Ukraine.

The pair lets you equip the front and rear compartments of a plate carrier at once. Matching dimensions and weight help distribute the load evenly. Adjust the shoulder straps and cummerbunds after installing the plates.

Class 3 Protection under DSTU 8782:2018

The protective plates are rated Class 3 under the Ukrainian standard DSTU 8782:2018. According to the stated test results, this model is designed to withstand 5.45 × 39 mm PS 7N6 and 7.62 × 39 mm PS 57-N-231 projectiles.

The stated protection covers:

• 45 × 39 mm PS, index 7N6;
• 62 × 39 mm PS, index 57-N-231;
• fragments within the manufacturer’s specifications;
• secondary impact elements and ricochets.

Check the protection class against the markings on the specific plates and their accompanying documents. The results apply to the projectile types and test conditions specified by the standard. Projectiles of the same caliber may differ in design and penetration capability.

UHMWPE Polyethylene Protective Plates

UHMWPE consists of high-strength polyethylene fibers formed into a dense multilayer structure. On impact, the material distributes energy across its surface and retains the incoming object within the limits of the stated protection class.

Polyethylene has a lower density than metal and many ceramic composites. As a result, one size M plate weighs 1.42 kg. The product retains the rigid shape needed for installation in the front or rear compartment of a plate carrier.

Features of UHMWPE:

• low weight;
• multilayer fiber structure;
• resistance to corrosion;
• no ceramic impact layer;
• suitable for making rigid protective elements;
• even distribution of the load across the surface;
• comfortable for extended wear.

Polyethylene is sensitive to high temperatures, so follow the manufacturer’s storage instructions. Open flames, heating appliances, and prolonged exposure to an overheated enclosed space may damage the material. Protect the outer cover from punctures and cuts as well.

Size M, 25 × 30 cm

Each protective element measures 250 × 300 mm. This format is common among size M plate carriers and suits users with a recommended chest circumference of up to 110 cm, with an approximate tolerance of 5 cm. The right size depends on chest width, height, and the coverage area required. Size M markings may correspond to different internal dimensions across plate carrier manufacturers.

Before purchase, check:

• the compartment’s internal width;
• the height of the plate pocket;
• compatibility with the 250 × 300 mm format;
• the permitted thickness of 23–24 mm;
• the shape of the compartment’s upper section;
• the area covered by the fastening flap;
• available space for a cushioning insert.

The protective plate should fit fully inside the pocket and remain stable during movement. Excess space may cause it to shift. After installation, check the position of the protective element while walking, bending, and squatting.

Differences Between BRONYX Medium and Large

The Medium and Large models have the same Class 3 rating, UHMWPE material, angled upper corners, and 3D Multi Curved profile. They differ in dimensions, weight, and recommended chest circumference.

Specification	BRONYX Medium	BRONYX Large
Size	M	L
Dimensions	250 × 300 mm	260 × 330 mm
Weight of one plate	1.42 kg	1.58 kg
Weight of the pair	2.84 kg	3.16 kg
Chest circumference	up to 110 cm, ±5 cm	111–118 cm

The Medium pair weighs 320 g less than the Large set. Size M also has more compact dimensions and leaves more room for movement. Large provides a greater coverage area for users with matching body measurements.

Angled Upper Corners

The upper corners of the protective plate are angled. This geometry makes the product narrower near the shoulder joints, leaving more room to extend the arms forward and work with attached equipment.

Check the plate’s position while wearing the fully equipped carrier. Utility, medical, and general-purpose pouches may affect mobility. Adjust their placement after practical testing.

3D Multi Curved Anatomical Shape

The 3D Multi Curved profile follows the main contours of the chest. Its two-plane curve helps the protective element sit closer to the torso and distributes contact pressure more evenly.

Use the factory markings to identify the front and rear surfaces. Install the plates in the orientation specified by the manufacturer. After installation, adjust the upper edges of the front and rear elements to the appropriate anatomical height.

Weight of the BRONYX Class 3 Pair

One protective plate weighs 1.42 kg. The two elements weigh 2.84 kg in total. Add the weight of the plate carrier, side protection, cushioning inserts, and pouches when calculating the full set’s weight.

Size and weight specifications:

• quantity per set: 2 pcs.;
• weight of one plate: 1.42 kg;
• set weight: 2.84 kg;
• size: M;
• dimensions: 250 × 300 mm;
• thickness: 23–24 mm;
• recommended chest circumference: up to 110 cm, ±5 cm;
• shape: angled upper corners;
• curve: 3D Multi Curved.

The low weight reduces the load on the shoulders and back during extended wear. Adjust the cummerbunds so the plates sit firmly against the torso. Readjust them after adding equipment.

Who Is the Lightweight Protective Plate Set For?

BRONYX M is designed for users who need Class 3 protection while keeping equipment weight down. The set suits extended wear in a plate carrier, active movement, training, and service tasks within the stated protection specifications.

The pair can be used to equip:

• service members;
• law enforcement personnel;
• security staff;
• medics and rescuers;
• instructors;
• users of size M plate carriers;
• professionals for whom equipment weight is critical.

Choose the protection level according to the anticipated threats. Class 3 covers the specific projectiles listed under DSTU 8782:2018. Protective plates with the appropriate certification are required for higher-class threats.

Why Use a Cushioning Insert?

If the plate carrier does not have an integrated cushioning layer, the manufacturer recommends using a separate insert. It sits between the rear surface of the plate and the torso, helping reduce the effect of backface deformation.

Account for the insert’s thickness when checking the compartment capacity. The flap should close fully after the plate and cushioning insert are installed. Excessive compression of the components may affect the carrier’s fit.

How to Install Two Protective Plates

Place one protective element in the front compartment and the other in the rear. Before installation, check that the products are intact, review their markings, and confirm the correct orientation of the curve.

Installation steps:

1. Inspect both plates.
2. Identify their front and rear surfaces.
3. Insert the first element into the front compartment.
4. Install the second plate in the rear pocket.
5. Add cushioning inserts if needed.
6. Close the lower flaps fully.
7. Adjust the shoulder straps.
8. Adjust the cummerbunds.
9. Check the fit while moving.

The plates should remain at the intended height while bending, running, and squatting. If the elements shift, check the compartment dimensions and the security of the flaps. Make final adjustments while wearing the full set of equipment.

Care and Storage

Store polyethylene protective plates in a dry place and within the temperature range specified by the manufacturer. Protect them from open flames, prolonged heating, punctures, and strong compression.

During inspection, check:

• the integrity of the outer cover;
• the condition of the edges and angled corners;
• for any delamination;
• that the shape is intact;
• that the markings are legible;
• the date of manufacture;
• the service life.

After an impact, take the protective plate out of service. A strong impact, visible deformation, or damage to the cover also calls for professional assessment. Do not use a product if the condition of its protective layers is unknown.

Technical Specifications

The BRONYX pair is designed to equip both main compartments of a plate carrier. Before ordering, check that the 250 × 300 mm format fits the specific cover.

Key specifications:

• brand: BRONYX;
• product type: protective plate set;
• quantity: 2 pcs.;
• protection class: 3;
• standard: DSTU 8782:2018;
• material: UHMWPE;
• size: M;
• dimensions: 250 × 300 mm;
• thickness: 23–24 mm;
• weight of one plate: 1.42 kg;
• total weight of the pair: 2.84 kg;
• recommended chest circumference: up to 110 cm, ±5 cm;
• shape: angled upper corners;
• curve: 3D Multi Curved;
• country of manufacture: Ukraine.

The BRONYX Medium set contains two Class 3 protective plates under DSTU 8782:2018 for the front and rear compartments of a plate carrier. Made from UHMWPE, the plates have angled upper corners, a 3D Multi Curved profile, and a total weight of 2.84 kg. Before ordering, check that the 250 × 300 mm dimensions and 23–24 mm thickness fit the cover’s internal measurements.

Why Buy a Pair of BRONYX M Protective Plates from TacMed?

The TacMed online store offers a set of two polyethylene BRONYX Class 3 protective plates in size M. The product page lists the current price, specifications, and ordering terms. Before purchase, you can check whether the plates fit a specific carrier and ask about the certification documents. Delivery is available to Kyiv, Lviv, Odesa, Kharkiv, Dnipro, Zaporizhzhia, Vinnytsia, Poltava, Cherkasy, Zhytomyr, Chernihiv, Rivne, Lutsk, Ternopil, Ivano-Frankivsk, Uzhhorod, Chernivtsi, Khmelnytskyi, Kropyvnytskyi, Mykolaiv, Kherson, and other cities across Ukraine. The TacMed catalog also offers Medium plate carriers, cushioning inserts, side protective packages, medical pouches, and IFAK kits.