Plate Carrier HMPC with ROC system (Black)

The HMPC Black Carrier is designed for SAPI protective plates measuring 25 × 30, 26 × 35, and 30 × 35 cm. The black color suits service, law enforcement, security, and training equipment intended for urban settings. The modular construction supports pouch attachment to the front MOLLE panel and the addition of side protective inserts. 2M (Due Emme) hardware provides quick removal of the equipment. ROC buckles are positioned on the cummerbunds and shoulder straps. Internal 3D mesh promotes air circulation and reduces pressure from the rigid panels against the torso.

Features of the HMPC Black Carrier

The model includes front and rear panels, adjustable cummerbunds, soft shoulder pads, and a removable front panel. The construction can be adjusted according to the user’s build, protective plate size, and amount of additional equipment.

The cummerbunds attach to the rear section with wide Alfatex hook-and-loop material. Changing their position adjusts the carrier width and fit. Once configured, the hook-and-loop material keeps the components secured under load during walking, running, and changes in posture.

The main features of the HMPC Black include:

• support for SAPI protective plates in three sizes;
• shoulder and side ROC buckles;
• removable MOLLE 3 × 6 front panel;
• pockets for side protective inserts;
• adjustable cummerbunds with hook-and-loop attachment;
• removable shoulder pads;
• internal 3D mesh lining;
• black color across all primary components.

This configuration supports either a compact setup or an extended equipment arrangement. Users can change pouch positions after practical testing of the carrier. The Black color coordinates easily with matching belts, backpacks, and pouches.

Carrier with ROC Quick Release

The quick-release system allows the carrier to be removed promptly during evacuation, medical assessment, equipment replacement, or another situation requiring rapid access to the torso. The HMPC uses hardware from the Italian manufacturer 2M (Due Emme).

Separate buckles are located on both cummerbunds and shoulder straps. The user can open the required side with one movement while preserving the previously adjusted strap length. The carrier circumference does not require readjustment after reassembly.

Advantages of the ROC system include:

• quick opening of the cummerbunds;
• separate release of the shoulder straps;
• removal from the required side;
• retention of strap settings;
• straightforward equipment setup;
• convenient operation while wearing protective gloves.

The release procedure should be practiced during training. Before every use, check that the buckles are fully closed and free from damage. Webbing and pouches must leave the ROC components accessible.

Which Protective Plates Fit the HMPC Black?

The internal compartments support SAPI plates in several sizes. This allows the coverage area to be selected according to the user’s measurements. When choosing a protective plate, check its width, height, thickness, and curvature.

Compatible protective component sizes include:

• 25 × 30 cm front and rear plates;
• 26 × 35 cm front and rear plates;
• 30 × 35 cm front and rear plates;
• 30 × 15 cm side protective inserts.

After installation, the protective components should fit closely inside their compartments. Their position should be tested while bending, squatting, running, and working with other equipment. The shoulder straps adjust the height of the front and rear panels.

Pockets for Side Protective Inserts

The cummerbunds include pockets for 30 × 15 cm protective inserts. This configuration extends coverage across the sides of the torso. The inserts sit inside the cummerbunds, leaving the outer surface available for equipment.

Before assembly, compare the actual dimensions of the protective components with the pocket specifications. Also consider the protection level, insert thickness, and manufacturer recommendations. Side protection affects total weight and fit, so the cummerbunds should be readjusted after installation.

Removable MOLLE 3 × 6 Front Panel

The front panel serves as a platform for attached equipment. The MOLLE 3 × 6 system accommodates components according to pouch width and available space. Its removable attachment speeds up changes to the front configuration.

The panel can hold:

• compatible equipment pouches;
• a compact medical pouch;
• a utility pocket;
• an administrative panel;
• attachments for additional equipment;
• a radio pouch.

Separate interchangeable panels with preinstalled pouches can be prepared for different tasks. During adjustment, test access to the equipment with both hands. Attached components must not obstruct the ROC buckles or interfere with movement while lying down.

HMPC Carrier Materials

The carrier is primarily made from US-manufactured Cordura® 500D. The fabric withstands regular friction, contact with protective plates, and loads from attached pouches. Its 500D density limits the weight of the textile platform while maintaining the required wear resistance.

The HMPC uses:

• US-manufactured Cordura® 500D;
• US-manufactured Milspec webbing;
• Alfatex hook-and-loop material manufactured to Velcro® brand standards;
• 2M (Due Emme) hardware;
• internal three-dimensional 3D mesh.

This combination of materials is designed for regular use and repeated equipment reconfiguration. Hardware attachment points, seams, and hook-and-loop sections should be inspected periodically. Remove dirt according to the recommendations of the fabric and hardware manufacturers.

3D Mesh and Shoulder Pads

The inner surfaces of the front and rear panels are lined with three-dimensional mesh. Its structure creates a ventilation gap between the carrier and clothing. The material promotes moisture transfer and softens contact between the equipment and torso.

Two shoulder pads distribute the load from the plates and pouches. Their position can be adjusted after setting the shoulder strap length. A fully equipped carrier should remain stable during movement and torso rotation.

Who Can Use the HMPC Black?

The black carrier is intended for users who require a restrained, single-color platform for urban and service equipment. It is suitable for training, range sessions, security tasks, and assembling an individual protective setup.

The HMPC Black can be used by:

• service personnel;
• law enforcement employees;
• security professionals;
• field training instructors;
• range training participants;
• professionals who require a modular Black platform.

The carrier can be combined with black pouches, a belt system, and a backpack. Its single-color design helps create a visually consistent equipment set. The final configuration should correspond to the user’s equipment and responsibilities.

Carrier Package Contents

The model is supplied with the main textile components required to assemble the modular platform. Protective plates, side inserts, and attached equipment are selected separately.

The package includes:

• front section of the carrier;
• rear section of the carrier;
• removable MOLLE 3 × 6 front panel;
• two cummerbunds with a quick-release system;
• two shoulder pads.

After installing the plates, adjust the shoulder strap length and cummerbund position. Then test every ROC buckle and check that the front panel is secured. Complete the final adjustment with the full set of pouches attached.

HMPC Black Technical Specifications

Before ordering, compare the model specifications with the dimensions of the protective plates and side components. Pouch compatibility with the MOLLE 3 × 6 platform should also be checked.

Main specifications:

• product type: protective plate carrier;
• model: HMPC;
• color: Black;
• protective plate format: SAPI;
• main plate sizes: 25 × 30, 26 × 35, and 30 × 35 cm;
• side insert size: 30 × 15 cm;
• material: Cordura® 500D;
• attachment system: MOLLE;
• front platform size: 3 × 6;
• quick release: side and shoulder;
• hardware: 2M (Due Emme);
• hook-and-loop material: Alfatex;
• internal lining: 3D mesh.

The model supports front, rear, and side protection. Its replaceable front panel allows the carrier to be adapted for different equipment sets. ROC buckles simplify putting on and rapidly removing the equipment.

Why Buy the HMPC Black Carrier from TacMed?

The TacMed online store offers the HMPC Black Carrier with a ROC system and removable MOLLE platform. The product page provides the current price, model availability, and ordering terms. Before purchasing, customers can confirm compatibility with their existing protective plates and planned side inserts. Delivery is available to Kyiv, Lviv, Odesa, Kharkiv, Dnipro, Zaporizhzhia, Vinnytsia, Poltava, Cherkasy, Zhytomyr, Chernihiv, Rivne, Lutsk, Ternopil, Ivano-Frankivsk, Uzhhorod, Chernivtsi, Khmelnytskyi, Kropyvnytskyi, Mykolaiv, Kherson, and other cities across Ukraine. The TacMed catalog also includes IFAK kits, medical pouches, tourniquets, and other carrier components.