Plate Carrier HMPC with ROC system (Multicam)

The HMPC Multicam Carrier is designed for SAPI protective plates measuring 25 × 30, 26 × 35, or 30 × 35 cm. Its modular construction allows the equipment layout to be adapted to the user’s role, duration of use, and assigned tasks. 2M (Due Emme) buckles on the cummerbunds and shoulder straps provide quick removal. The front section has a replaceable panel with a MOLLE 3 × 6 system. Medical, administrative, utility, and other pouches can be attached to it. The cummerbunds include pockets for 30 × 15 cm side protective inserts, while the internal 3D mesh improves ventilation during extended use of the equipment.

Modular Construction of the HMPC Multicam

The carrier consists of front and rear panels, two cummerbunds, a removable front panel, and shoulder straps with soft pads. Each component can be adjusted according to the user’s build, protective plate size, and amount of attached equipment.

At the rear, the cummerbunds attach to the panel with Alfatex hook-and-loop material. This attachment method helps adjust the circumference and distribute the load between the shoulders and torso. Once adjusted, the cummerbunds keep the front and rear sections securely in position.

The model’s main construction features include:

• compartments for SAPI plates in three sizes;
• side pockets for 30 × 15 cm protective inserts;
• removable front panel with MOLLE 3 × 6;
• shoulder quick-release system;
• ROC buckles on both cummerbunds;
• fit adjustment with hook-and-loop material;
• two removable shoulder pads;
• internal three-dimensional 3D mesh.

The modular construction simplifies preparation for different use scenarios. The pouch layout can be changed after training or testing the fully assembled equipment. This helps users find a convenient configuration and maintain access to essential supplies.

ROC Quick-Release System

The carrier uses hardware from the Italian brand 2M (Due Emme). ROC buckles are positioned on the sides and shoulder straps, allowing the user to open the equipment quickly. The system also simplifies daily use because the cummerbund settings on the rear hook-and-loop panel remain unchanged.

Quick release may be required during evacuation, medical assessment, equipment replacement, or entry into water. The hardware layout allows either side of the carrier to be opened with one movement. Before use, every buckle should be inspected and tested several times while wearing the equipment.

The ROC system provides:

• one-movement opening of the cummerbunds;
• separate release of the shoulder straps;
• retention of the previously adjusted strap length;
• release from the left or right side;
• compatibility with the modular HMPC construction.

The quick-release procedure should be practiced during training. The user should know the buckle positions and the removal sequence when wearing gloves, in darkness, and in an uncomfortable position. After each release, check that the system has been reassembled correctly.

Replaceable MOLLE 3 × 6 Front Panel

The front panel attaches to the main section and supports quick replacement of the complete pouch setup. The MOLLE 3 × 6 format accommodates equipment according to its width, weight, and frequency of use. Milspec webbing secures the pouches and withstands loads during active movement.

Several front panels can be prepared in advance for different tasks. One may carry general-purpose pouches, while another may contain medical or administrative equipment. Replacing the complete front panel reduces reconfiguration time.

The front panel can hold:

• compatible equipment pouches;
• a compact first-aid pouch;
• an administrative panel;
• a radio pouch;
• a utility pocket;
• holders for gloves and other compact equipment.

The equipment layout should be tested while standing, sitting, and lying down. Excessive bulk on the front panel may complicate movement in confined spaces. Frequently used items should remain within the natural range of hand movement.

Compatibility with SAPI Plates

The HMPC supports several common sizes of SAPI protective plates. This allows the carrier to be fitted according to the user’s physical measurements and required coverage area. Before installation, check the width, height, thickness, and shape of each plate.

The carrier is compatible with:

• 25 × 30 cm plates;
• 26 × 35 cm plates;
• 30 × 35 cm plates;
• 30 × 15 cm side protective inserts.

After installation, the plates should fit closely inside the compartments and remain in place during running, bending, and changes in posture. The upper edge of the front plate should be adjusted according to the anatomical position of vital organs. The equipment fit should be tested with the complete set of pouches attached.

Multicam Color and Carrier Materials

Multicam is designed for areas containing mixed shades of vegetation, soil, and dry grass. Blended transitions between green, brown, and light sections reduce silhouette definition at different distances. The carrier can be combined with pouches, backpacks, and belt systems in Multicam, Coyote, and related colors.

The primary material is US-manufactured Cordura® 500D. The fabric provides sufficient strength for regular contact with protective plates, pouches, webbing, and other equipment components. Its moderate density helps control the overall carrier weight.

The HMPC uses:

• US-manufactured Cordura® 500D Multicam;
• US-manufactured Milspec webbing;
• Alfatex hook-and-loop material manufactured to Velcro® brand standards;
• 2M (Due Emme) hardware;
• internal three-dimensional 3D mesh.

Carrier quality depends on the fabric, seam strength, webbing, hook-and-loop elements, and buckle reliability. The selected materials are designed for intensive use and repeated configuration changes. To extend the service life, clean the equipment according to the manufacturer’s instructions and inspect hardware attachment points regularly.

Ventilation and Fit Adjustment

The internal surfaces of the carrier are lined with 3D mesh. Its three-dimensional structure creates space between the torso and the panels, promoting air circulation and moisture transfer. This feature is particularly noticeable during physical activity and extended wear.

Soft shoulder pads distribute pressure from the plates and attached equipment. The cummerbunds adjust in width, while the shoulder straps control the height of the front and rear panels. After adjustment, the carrier should fit closely against the torso and remain stable during movement.

HMPC Carrier Package Contents

The package includes all textile components required to assemble the basic platform. Pouches, protective plates, and side inserts can be selected separately according to the user’s requirements.

The package includes:

• front section of the carrier;
• rear section of the carrier;
• removable front panel with MOLLE 3 × 6;
• two cummerbunds with the ROC quick-release system;
• two shoulder pads.

Before use, inspect the attachment of every component and adjust the carrier with the plates installed. Final adjustment should be completed with all equipment intended for the MOLLE system. This allows the user to assess balance, pouch accessibility, and panel stability.

Technical Specifications

The model specifications help determine compatibility with protective components and additional equipment. Before ordering, compare the dimensions of the available plates with the supported formats.

Main specifications:

• product type: protective plate carrier;
• model: HMPC;
• color: Multicam;
• plate format: SAPI;
• plate sizes: 25 × 30, 26 × 35, and 30 × 35 cm;
• side protective insert size: 30 × 15 cm;
• material: Cordura® 500D Multicam;
• equipment attachment system: MOLLE;
• MOLLE panel size: 3 × 6;
• quick release: side and shoulder;
• hardware manufacturer: 2M (Due Emme);
• internal lining: 3D mesh;
• cummerbund adjustment: Alfatex hook-and-loop material.

The HMPC Multicam Carrier supports SAPI plates in three sizes and 30 × 15 cm side protective inserts. Cordura® 500D, internal 3D mesh, and adjustable cummerbunds provide wear resistance and a secure fit. Before ordering, check the protective plate format and determine the required equipment arrangement on the MOLLE system.

Why Buy the HMPC Multicam Carrier from TacMed?

TacMed offers the HMPC Multicam Carrier with side and shoulder ROC systems at an accessible price. The product page provides the current price, model specifications, and delivery options throughout Ukraine. Customers can confirm compatibility with specific protective plates, side inserts, and attached pouches before ordering. Orders are delivered to Kyiv, Lviv, Odesa, Kharkiv, Dnipro, Zaporizhzhia, Vinnytsia, Poltava, Cherkasy, Zhytomyr, Chernihiv, Rivne, Lutsk, Ternopil, Ivano-Frankivsk, Uzhhorod, Chernivtsi, Khmelnytskyi, Kropyvnytskyi, Mykolaiv, Kherson, and other cities across Ukraine. The TacMed catalog also includes medical pouches, tourniquets, ready-made IFAK kits, and other components for modular equipment.