Armor plate Bronyx Large 5th class

The BRONYX Large level 5 set contains two composite protective plates for the front and rear compartments of a carrier or protective vest. Each plate measures 260 × 330 mm and weighs 2.9 kg. The pair has a total weight of 5.8 kg. The model is made from silicon carbide SiC and ultra-high-molecular-weight polyethylene. This construction is designed to resist the test types specified for protection level 5 under DSTU 8782:2018. The Shooter’s Cut shape and 3D Multi Curved profile adapt the larger plate to the contours of the torso while preserving shoulder mobility.

Features of BRONYX Level 5 Protective Plates

The set is intended for users who require protective plates in a larger format with an increased protection level. Size L is recommended for a chest circumference of 111-118 cm and compatible L/XL carriers.

Silicon carbide forms a hard front layer that receives the initial contact from the impacting element. The UHMWPE backing retains ceramic and projectile fragments while distributing residual energy across the protective component.

The main advantages of the set include:

• two protective plates for front and rear coverage;
• protection level 5 according to DSTU 8782:2018;
• SiC and UHMWPE composite construction;
• resistance to the stated armor-piercing incendiary test types;
• size L with dimensions of 260 × 330 mm;
• Shooter’s Cut shape;
• anatomical 3D Multi Curved profile;
• recommended chest circumference of 111-118 cm;
• manufactured in Ukraine.

The pair fills both primary compartments of a compatible carrier. Matching dimensions and weight help balance the front and rear sections of the equipment. After installation, adjust the plate height, cummerbund tension, and shoulder strap position.

Protection Level 5 According to DSTU 8782:2018

The plates correspond to protection level 5 under the Ukrainian DSTU 8782:2018 standard. According to the stated specifications, the model was tested for resistance to 7.62 × 39 mm BZ and 7.62 × 54 mm LPS projectiles. The manufacturer also states protection against lower-level threats, fragments, dispersed debris, and deflected elements.

The stated protection level covers:

• 62 × 39 mm BZ, index 57-BZ-231;
• 62 × 54 mm LPS, index 57-N-232s;
• lower-level threats under DSTU 8782:2018;
• fragments and dispersed debris within the stated specifications;
• secondary and deflected elements.

The protection level should be verified through the markings and documents supplied with the specific set. Certification testing uses defined projectile types, velocities, distances, and impact angles. A damaged or previously impacted plate should not be reused without assessment by a qualified specialist.

Protection Against the 7.62 × 39 mm BZ Test Projectile

The 7.62 × 39 mm BZ 57-BZ-231 projectile contains a penetrating element and an incendiary component. Resistance to this threat requires a hard material capable of acting on the projectile core during contact. Silicon carbide ceramic performs this function in the BRONYX plate.

After contact with the ceramic layer, the remaining projectile material and SiC fragments reach the polyethylene backing. UHMWPE retains them within its structure and distributes energy across a larger area. The stated protective result applies to conditions defined by the standard and test protocol.

Protection Against the 7.62 × 54 mm LPS Test Projectile

The second stated threat type is the 7.62 × 54 mm LPS 57-N-232s projectile. It has considerable kinetic energy, so the plate combines a hard ceramic surface with an energy-absorbing polyethylene backing.

When selecting protective equipment, consider the exact designation of the test projectile. The same caliber may include projectiles with different constructions, core materials, and penetration characteristics. The stated level should not be extended to test types absent from the corresponding documentation.

SiC and UHMWPE Composite Construction

Silicon carbide has high hardness and a lower density than some other protective ceramics. It is used in composite protective components requiring resistance to penetration with controlled weight. In BRONYX products, SiC works together with a multilayer UHMWPE backing.

The materials perform the following functions:

• SiC receives the initial contact from the impacting element;
• the ceramic contributes to disrupting or deflecting the penetrating core;
• UHMWPE retains fragments;
• the polyethylene backing distributes residual energy;
• the outer covering protects the internal construction during use.

The performance of the composite system depends on the integrity of every layer. A severe fall may damage the ceramic inside the plate even when the surface shows no clear signs. After an impact, inspect the protective component and submit it for specialized assessment when required.

Size L and Increased Coverage Area

Dimensions of 260 × 330 mm correspond to size L. These plates are designed for users with a recommended chest circumference of 111-118 cm and provide a larger coverage area than smaller models.

Size should be selected according to the user’s anatomical measurements and the internal dimensions of the carrier. The plate should cover the designated chest areas, remain stable, and permit unrestricted arm movement.

Before ordering, check:

• internal width of the front and rear compartments;
• height of the carrier pockets;
• permitted protective component thickness;
• shape of the upper compartment corners;
• reliability of the lower flaps;
• carrier adjustment range;
• capacity for an additional cushioning pad.

L and L/XL labels may correspond to different internal dimensions across equipment manufacturers. Exact pocket measurements take priority when checking compatibility. A 260 × 330 mm plate must fit fully inside the compartment and remain securely held by the lower flap.

Shooter’s Cut Shape

The Shooter’s Cut shape has angled upper corners that provide more space around the shoulders. This geometry simplifies forward arm movement, equipment handling, and changes in torso position. The cutouts also reduce contact between the protective component and shoulder straps.

After installation, test mobility while wearing the fully equipped carrier. Pouches on the front panel may affect posture and the available range of movement. Complete the adjustment with the equipment set that the user plans to carry regularly.

3D Multi Curved Profile

The plates have an anatomical two-plane curve identified as 3D Multi Curved. The profile follows the primary contours of the chest and distributes contact pressure. For the larger L size, this geometry has a particular effect on fit and stability.

The curved plate must be oriented correctly relative to the torso. Manufacturer markings identify the front surface, rear surface, and upper edge. Reversed installation may impair the fit and conflict with the intended protective construction.

Weight of the BRONYX Large Plate Pair

One protective plate weighs 2.9 kg. The pair has a total weight of 5.8 kg. The overall protective setup also includes the carrier, side inserts, cushioning pads, pouches, and their contents.

Main dimensions and weight parameters:

• weight of one plate: 2.9 kg;
• total pair weight: 5.8 kg;
• package quantity: 2;
• size: L;
• dimensions: 260 × 330 mm;
• recommended chest circumference: 111-118 cm;
• shape: Shooter’s Cut;
• profile: 3D Multi Curved.

The set weight is distributed between the front and rear sections of the carrier. Proper cummerbund adjustment transfers part of the load from the shoulders to the torso. Shoulder pads may reduce localized strap pressure during extended wear.

Why Use an Additional Cushioning Pad?

When the protective vest cover lacks built-in cushioning, the manufacturer recommends installing a separate pad. It sits between the rear surface of the protective plate and the torso and helps reduce the effect of backface deformation.

The cushioning pad may also improve pressure distribution from the rigid protective component. Its thickness must be added to the plate thickness when checking compartment capacity. Once all layers are installed, the lower flap must close across the entire hook-and-loop surface.

How to Install the Set in a Carrier

The two protective plates are intended for the front and rear compartments. Before installation, inspect the surface, check the markings, and determine the correct orientation of each component. The angled Shooter’s Cut corners should be positioned at the top.

Installation sequence:

1. Check the integrity of the outer covering.
2. Locate the front and rear surface markings.
3. Install the first plate in the front compartment.
4. Place the second plate in the rear compartment.
5. Add cushioning pads when required by the configuration.
6. Close the lower flaps completely.
7. Adjust the shoulder straps and cummerbunds.
8. Check plate stability during movement.

The upper edges of the front and rear plates should be positioned at the appropriate anatomical height. After adjustment, perform bends, squats, and several active arm movements. The plates must remain secured without shifting inside the compartments.

Care and Condition Inspection

Ceramic protective plates require protection from severe impacts and falls. During transportation, use a compatible carrier, a bag with a cushioning insert, or the original packaging. Store the set according to the manufacturer’s temperature and humidity requirements.

During inspection, check:

• the outer covering;
• edges and angled corners;
• absence of tears and punctures;
• preservation of the original geometry;
• legibility of the markings;
• manufacturing date and service life.

Do not place heavy objects on the plates during storage. After a fall, severe impact, direct strike, or visible damage, remove the set from use. Further suitability should be determined through professional inspection.

Technical Specifications

The set is supplied as a pair for the front and rear carrier compartments. Before purchasing, compare the protective component dimensions with the internal specifications of the particular carrier.

Main BRONYX Large specifications:

• brand: BRONYX;
• product type: protective plate set;
• package quantity: 2;
• protection level: 5;
• certification: DSTU 8782:2018;
• materials: silicon carbide SiC and UHMWPE;
• size: L;
• dimensions: 260 × 330 mm;
• weight of one plate: 2.9 kg;
• total pair weight: 5.8 kg;
• recommended chest circumference: 111-118 cm;
• shape: Shooter’s Cut;
• anatomical profile: 3D Multi Curved;
• country of manufacture: Ukraine.

The BRONYX Large set contains two level 5 protective plates rated according to DSTU 8782:2018 for the front and rear carrier compartments. The combination of silicon carbide SiC and UHMWPE, Shooter’s Cut shape, and 3D Multi Curved profile provides the stated protective properties and anatomical fit. Before purchasing, confirm that the 260 × 330 mm dimensions and total weight of 5.8 kg are suitable for the carrier and intended conditions of use.

Why Buy BRONYX Large Level 5 Protective Plates from TacMed?

The TacMed online store offers a pair of BRONYX Large level 5 protective plates for compatible L/XL carriers. The product page provides the current price, set specifications, and ordering terms. Customers can confirm whether the plate dimensions match the internal compartments of their carrier before purchasing. Delivery is available to Kyiv, Lviv, Odesa, Kharkiv, Dnipro, Zaporizhzhia, Vinnytsia, Poltava, Cherkasy, Zhytomyr, Chernihiv, Rivne, Lutsk, Ternopil, Ivano-Frankivsk, Uzhhorod, Chernivtsi, Khmelnytskyi, Kropyvnytskyi, Mykolaiv, Kherson, and other cities across Ukraine. The TacMed catalog also includes compatible carriers, cushioning pads, side protective inserts, medical pouches, and IFAK kits.