Pair of BRONYX Ultimate 3rd class armor plate size L

The size L BRONYX Ultimate set contains two ultralight protective plates rated Class 3 under DSTU 8782:2018. Each protective element weighs 990 g, bringing the pair to approximately 1.98 kg. Each plate measures 260 × 330 mm. The Ultimate series is made from Honeywell or Dyneema ultra-high-molecular-weight polyethylene. Using protective-grade UHMWPE reduces the set’s weight while maintaining the protection specified for Class 3. The plates have angled upper corners and a 3D Multi Curved anatomical shape.

Features of the BRONYX Ultimate Series

Ultimate is BRONYX’s flagship line of rigid polyethylene protective elements. It focuses on minimal weight, an ergonomic shape, and the use of Honeywell or Dyneema protective-grade materials. The set weighs approximately 1.98 kg, which can make a noticeable difference when wearing a plate carrier for extended periods. Reducing the weight of the front and rear plates leaves more of the load capacity available for a first aid kit, water, communications equipment, and other gear.

Key benefits of Ultimate:

• two protective plates in the set;
• Class 3 protection under DSTU 8782:2018;
• each plate weighs 990 g;
• the pair weighs approximately 1.98 kg;
• Honeywell or Dyneema UHMWPE;
• size L, measuring 260 × 330 mm;
• angled upper corners;
• 3D Multi Curved anatomical shape;
• recommended chest circumference: 111–118 cm;
• manufactured in Ukraine.

The pair is designed for installation in the front and rear compartments of a plate carrier. Matching dimensions and weight help distribute the load evenly. Make final equipment adjustments after installing the plates, cushioning inserts, and pouches.

990 g: An Advantage for Extended Wear

Each BRONYX Ultimate L plate weighs 990 g. The pair weighs approximately 1.98 kg. This weight is a key difference between Ultimate and standard polyethylene and composite protective plates of a similar size.

A lighter load affects user endurance, pressure from the shoulder straps, and the overall balance of the equipment. The difference is especially noticeable during extended movement, evacuation tasks, and use with additional equipment.

Size and weight specifications:

• weight of one plate: 990 g;
• weight of two plates: approximately 1.98 kg;
• quantity per set: 2 pcs.;
• size: L;
• dimensions: 260 × 330 mm;
• recommended chest circumference: 111–118 cm;
• shape: angled upper corners;
• curve: 3D Multi Curved.

Add the weight of the plate carrier, cummerbunds, side panels, and attached equipment to the weight of the protective elements. Lightweight plates reduce the set’s base load, while proper adjustment remains essential. The cummerbunds should hold the front and rear panels securely against the torso.

Comparison of BRONYX Ultimate and the Standard L Model

Both models are size L, provide Class 3 protection, and have angled upper corners and a 3D Multi Curved shape. Their main differences are the type of protective-grade UHMWPE and the weight of the protective elements.

Specification	BRONYX Ultimate L	Standard BRONYX L
Protection class	3	3
Size	L	L
Dimensions	260 × 330 mm	260 × 330 mm
Weight of one plate	0.99 kg	1.58 kg
Weight of the pair	1.98 kg	3.16 kg
Material	Honeywell or Dyneema	UHMWPE
Curve	3D Multi Curved	3D Multi Curved

 

One Ultimate plate weighs 590 g less than the standard size L model, which weighs 1.58 kg. The difference between the two sets is approximately 1.18 kg. This makes Ultimate a distinct option for users looking to reduce the weight of their protective gear as much as possible.

Honeywell or Dyneema UHMWPE

The Ultimate series uses Honeywell AP3-MH or Dyneema AP3-MD protective-grade materials. Both are types of ultra-high-molecular-weight polyethylene designed for use in lightweight protective structures.

UHMWPE fibers are formed into a multilayer structure. On impact, the load is distributed across the layers, and the incoming object is retained within the material in accordance with the stated protection class.

Features of protective-grade polyethylene:

• high fiber strength relative to weight;
• multilayer construction;
• low density;
• corrosion resistance;
• suitable for making rigid, lightweight plates;
• energy distribution across the protective element;
• no ceramic front layer.

Check the markings on the set received to identify the specific material, Honeywell AP3-MH or Dyneema AP3-MD. The material may depend on the product version or manufacturing batch. Documents for the specific plates should confirm the protection class and compliance with the standard.

Class 3 Protection under DSTU 8782:2018

BRONYX Ultimate meets Class 3 of the Ukrainian standard DSTU 8782:2018. According to test results, the protective plates are designed to protect against 5.45 × 39 mm PS 7N6 and 7.62 × 39 mm PS projectiles.

Specified threats:

• 45 × 39 mm 7N6, PS;
• 62 × 39 mm PS;
• fragments within the manufacturer’s stated specifications;
• secondary impact elements and ricochets.

Check the protection level against the markings and certification documents. The test parameters apply to specified projectile types, velocities, and other laboratory conditions. Projectiles of the same caliber with a different core may have greater penetration capability.

Protection Against 5.45 × 39 mm 7N6

The 5.45 × 39 mm 7N6 projectile is among the specified threats for this model. On contact, the multilayer UHMWPE absorbs the load, deforms the incoming object, and distributes energy across the plate’s surface.

The stated protection applies under the conditions of certification testing. The condition of the protective element, distance, velocity, and angle of impact affect how the material performs. After an impact, the plate must be taken out of service.

Protection Against 7.62 × 39 mm PS

The second specified projectile is 7.62 × 39 mm PS. The multilayer polyethylene structure retains the projectile and resulting fragments within the parameters of Class 3 under DSTU 8782:2018.

Check the protection class against the full projectile index. Projectile design and core material directly affect penetration capability. Use against threats in a higher class requires specific confirmation from the manufacturer.

Size L, 260 × 330 mm

BRONYX Ultimate L has larger dimensions of 260 × 330 mm. The model is recommended for users with a chest circumference of 111–118 cm. Its size provides the appropriate coverage area for plate carriers with Large compartments.

Before ordering, check:

• the internal width of the front compartment;
• the height of the rear pocket;
• compatibility with the 260 × 330 mm format;
• the permitted thickness of the protective element;
• the shape of the compartments’ upper corners;
• whether a cushioning insert can be installed;
• the reliability of the lower flaps.

Size L markings may correspond to different actual dimensions across plate carrier manufacturers. The internal pocket measurements determine compatibility. The plates should fit fully and remain at the intended height during movement.

Angled Upper Corners

The angled upper corners free up space around the shoulders. This geometry makes it easier to extend the arms forward, use the pouches, and move the shoulder joints. For larger size L plates, the shape helps preserve mobility.

Check freedom of movement with the front panel fully equipped. Bulky pouches can affect arm position and comfort when working in a prone position. Adjust their placement after practical testing.

3D Multi Curved Anatomical Shape

The curve in two planes helps the protective plate follow the shape of the chest. The surface sits closer to the body, and contact pressure is distributed over a larger area. This can affect comfort during extended wear of Large plates.

Use the BRONYX markings to identify the front and rear surfaces. Install both elements in the orientation specified by the manufacturer. After installation, adjust the height of the front and rear plates using the shoulder straps.

Who Are BRONYX Ultimate Plates For?

The set is designed for users who need large Class 3 protective plates with minimal weight. It suits extended wear, tasks involving frequent movement, and configurations with a large amount of additional equipment.

BRONYX Ultimate can be used to equip:

• service members;
• medics and rescuers;
• law enforcement personnel;
• security staff;
• instructors;
• users of size L plate carriers;
• professionals for whom equipment weight is a critical factor.

Choose the protection class based on the anticipated threats. Ultimate Class 3 is designed for the specific projectiles listed in the certification documents. Protective plates of an appropriate composite construction are required for armor-piercing projectiles and higher-class threats.

Using a Cushioning Insert

If the plate carrier does not have an integrated cushioning layer, the manufacturer recommends adding a separate insert. It sits between the rear surface of the protective plate and the torso. The insert helps reduce the effect of backface deformation.

Choose a cushioning insert that matches the required size and thickness. The plate carrier compartment must fit the protective element and the insert together. The lower flap should close fully across the fastening area.

How to Install the BRONYX Ultimate Pair

The set contains two matching plates for the front and rear compartments. Before installation, inspect the outer cover and check the markings on each element.

Installation steps:

1. Check the protective plates for damage.
2. Identify the front and rear surfaces.
3. Install the first plate in the front compartment.
4. Place the second plate in the rear pocket.
5. Add cushioning inserts if needed.
6. Close the fastening flaps fully.
7. Adjust the shoulder straps.
8. Adjust the cummerbunds.
9. Check the plates’ position while moving.

Both protective elements should remain at the appropriate anatomical height. After adjusting them, bend, squat, and move your arms. Check their position again after adding pouches and other equipment.

Storing Polyethylene Plates

Protect UHMWPE from high temperatures, open flames, and damage to the outer cover. Store the set in a dry place within the temperature range specified by the manufacturer. Avoid prolonged compression under heavy objects.

During inspection, check:

• the condition of the outer cover;
• the integrity of the edges;
• for any delamination;
• that the 3D Multi Curved shape is intact;
• that the markings are legible;
• the name of the material used;
• the date of manufacture and service life.

After an impact, the protective plate must be taken out of service. Visible deformation, damage to the outer layer, or a strong mechanical impact calls for a professional assessment. Do not judge the condition of the inner layers by the surface appearance alone.

Technical Specifications

BRONYX Ultimate is supplied as a pair for the front and rear compartments of a plate carrier. Before purchase, check that the 260 × 330 mm format is compatible with the specific cover.

Key specifications:

• brand: BRONYX;
• series: Ultimate;
• product type: protective plate set;
• quantity: 2 pcs.;
• protection class: 3;
• standard: DSTU 8782:2018;
• material: UHMWPE;
• material option: Honeywell AP3-MH or Dyneema AP3-MD;
• size: L;
• dimensions: 260 × 330 mm;
• weight of one plate: 990 g;
• total set weight: approximately 1.98 kg;
• recommended chest circumference: 111–118 cm;
• shape: angled upper corners;
• curve: 3D Multi Curved;
• country of manufacture: Ukraine.

The BRONYX Ultimate Large set contains two Class 3 protective plates under DSTU 8782:2018 for the front and rear compartments of a plate carrier. Made from Honeywell or Dyneema UHMWPE, the plates have angled upper corners, a 3D Multi Curved shape, and a total weight of approximately 1.98 kg. Before purchase, check that the 260 × 330 mm dimensions fit the internal measurements of the cover.

Why Buy BRONYX Ultimate from TacMed?

The TacMed online store offers a pair of ultralight BRONYX Ultimate Class 3 protective plates in size L. The product page lists the current set price, specifications, and ordering terms. Before purchase, you can ask which type of UHMWPE is used, whether the plates fit a specific carrier, and whether certification documents are available.

Delivery is available to Kyiv, Lviv, Odesa, Kharkiv, Dnipro, Zaporizhzhia, Vinnytsia, Poltava, Cherkasy, Zhytomyr, Chernihiv, Rivne, Lutsk, Ternopil, Ivano-Frankivsk, Uzhhorod, Chernivtsi, Khmelnytskyi, Kropyvnytskyi, Mykolaiv, Kherson, and other cities across Ukraine. The TacMed catalog also offers Large plate carriers, cushioning inserts, side protective packages, medical pouches, and IFAK kits.