Class 2 Ballistic Packages 40x15

The BRONYX 40 × 15 cm Soft Ballistic Side Panel is designed to enhance the side protection of a plate carrier or body armor system. The panel is installed inside a cummerbund, a dedicated side pocket, or another compatible equipment compartment. Its flexible construction conforms more naturally to the body's contours while maintaining mobility during extended wear. The panel is manufactured from Ultra-High-Molecular-Weight Polyethylene (UHMWPE) and provides Level 2 ballistic protection certified according to DSTU standards. The 40 × 15 cm size is compatible with many cummerbunds designed to accommodate soft side ballistic inserts.   

What Is the 40 × 15 cm Ballistic Side Panel Used For?

Front and rear armor plates protect the primary areas of the chest and back, while the sides of the torso remain less protected. Soft ballistic panels help extend the protected coverage over the ribs, side torso, and cummerbund areas.   

The 40 × 15 cm format can also be installed in compatible compartments designed to protect the abdomen, lower back, or other body areas. The exact installation method depends on the design of the plate carrier and the intended purpose of the specific pocket.

The ballistic panel can be installed:

• inside the left plate carrier cummerbund;
• inside the right cummerbund;
• in side armor pockets;
• in a compatible abdominal protection panel;
• in a lower back compartment;
• as an additional soft protective layer inside a manufacturer-approved compartment.

The panel should fit completely inside the pocket and remain securely positioned during movement. It should not be placed in improvised equipment compartments without proper retention. Always verify the correct orientation and approved installation method according to the BRONYX markings.   

Level 2 Ballistic Protection Certified to DSTU

The BRONYX soft ballistic panel provides Level 2 protection and is certified according to DSTU standards. The panel is intended to provide protection against the ballistic threats specified by the standard while also reducing the risk posed by fragments, shrapnel, ricochets, and secondary projectiles.   

When selecting ballistic protection, always verify the product certificate and markings. Documentation should specify the applicable standard, protection level, manufacturing date, testing conditions, and certified protective characteristics.

Key functions of the panel include:

• extending ballistic coverage;
• protecting the side areas of the torso;
• stopping fragments within the certified protection parameters;
• providing protection against shrapnel and secondary fragments;
• reducing the effects of ricochets;
• complementing primary armor plates;
• installation in cummerbunds with 40 × 15 cm ballistic pockets.

Level 2 protection does not replace hard armor plates in situations requiring rifle-rated ballistic protection. The panel serves as an additional soft ballistic insert and performs within the certified characteristics established for this specific model. The protection level cannot be determined solely by the material or panel thickness.   

UHMWPE Material

UHMWPE stands for Ultra-High-Molecular-Weight Polyethylene. It consists of extremely high-strength fibers arranged into a flexible multilayer structure.

When struck by a projectile or fragment, the fibers distribute the impact energy across the surface of the panel. The multilayer construction helps contain fragments within the ballistic package. The flexibility of UHMWPE allows the panel to be installed in cummerbunds and other locations where rigid armor plates could restrict movement.   

Advantages of UHMWPE include:

• lightweight construction;
• flexible multilayer structure;
• corrosion resistance;
• convenient installation inside cummerbunds;
• improved conformity to body contours;
• expanded protective coverage;
• suitability for extended wear.

UHMWPE is sensitive to high temperatures and open flames and should always be used within the manufacturer's specified operating conditions. Damage to the outer cover may reduce protection against moisture and contamination. Panels showing tears, punctures, or delamination should be inspected before further use.   

Side Protection for Plate Carrier Cummerbunds

The 40 × 15 cm size is intended for installation inside the side compartments of compatible plate carriers. These panels protect the section of the torso located between the front and rear armor plates. Complete bilateral protection requires compatible panels on both the left and right sides.   

Before purchasing, verify:

• the presence of dedicated ballistic pockets;
• the internal pocket dimensions;
• compatibility with the 40 × 15 cm format;
• flap configuration;
• secure panel retention;
• the ability to readjust the cummerbund after installation;
• the required panel orientation.

After installing side ballistic panels, the fit of the plate carrier may change. The cummerbund should be readjusted so that both panels remain firmly against the sides of the torso without shifting during movement. Loose retention may reduce equipment stability while running or bending.   

Compatibility with Plate Carriers

The ballistic panel is designed for equipment featuring pockets sized 40 × 15 cm. It may be compatible with BRONYX, M-Tac, PPO, and other tactical plate carriers designed for this format. Actual internal pocket dimensions remain the determining compatibility factor.   

The plate carrier model or size alone does not guarantee compatibility with every side ballistic panel. Cummerbunds from different manufacturers vary in height, length, flap design, and ballistic insert configuration.

Before ordering, measure the inside of the pocket carefully. It should accommodate a 400 × 150 mm panel without folding the edges. The closure flap should fully close and securely retain the panel.

Ballistic Panel as an Additional Cushioning Layer

The flexible panel may be installed behind a hard armor plate only when such installation is specifically approved by the armor manufacturer. A soft ballistic panel can provide an additional layer between the hard plate and the body, influencing pressure distribution.   

This installation method does not change the certified protection level of the hard armor plate and does not automatically create a certified combined armor system. Compatibility between both components should always be verified. To reduce behind-armor blunt trauma, the manufacturer may recommend a dedicated trauma pad with specified characteristics.

Who Is the BRONYX 40 × 15 cm Ballistic Panel Designed For?

This model is intended for users who need additional protection for the side areas of the torso while covering the gap between the primary armor plates. The compact format is ideal for plate carriers equipped with cummerbunds designed for soft ballistic inserts.   

The panel is suitable for:

• military personnel;
• members of the Defense Forces;
• law enforcement personnel;
• rescue and special response units;
• private security professionals;
• tactical training instructors;
• users of plate carriers with 40 × 15 cm ballistic pockets.

The overall configuration should be selected according to expected threats and the design of the body armor system. Adding side panels increases both protective coverage and total equipment weight. The complete configuration should be tested during walking, running, bending, and prone shooting positions before operational use.

How to Install the Ballistic Panel

Before installation, inspect the outer cover, verify the product markings, and confirm the correct panel orientation. The cummerbund pocket should be free of debris that could damage the ballistic insert or create localized pressure points.   

Installation procedure:

1. Measure the internal pocket dimensions.
2. Verify compatibility with the 40 × 15 cm size.
3. Identify the front and rear sides of the panel.
4. Insert the panel into the cummerbund or dedicated compartment.
5. Smooth the edges inside the pocket.
6. Fully close the retaining flap.
7. Readjust the cummerbund.
8. Verify panel stability during movement.

The panel should completely cover the intended area while remaining securely positioned against the body. If the insert shifts, adjust the retention system or use a more compatible pocket. After installing panels on both sides, verify that they are positioned symmetrically.

Caring for the Soft Ballistic Panel

Protect the panel from punctures, cuts, open flames, and prolonged exposure to high temperatures. The internal ballistic element should only be washed or immersed in water if explicitly permitted by the manufacturer. Clean the outer cover according to BRONYX care instructions.   

Regular inspections should include:

• the condition of the outer cover;
• absence of punctures and cuts;
• seam integrity;
• uniform panel thickness;
• absence of delamination;
• readable markings;
• manufacturing date and service life.

Store the panel in a dry environment while following the manufacturer's temperature recommendations. Excessive bending, twisting, or prolonged compression under heavy objects may damage the internal structure. Any panel that has sustained a ballistic impact must be removed from service.

Technical Specifications

The BRONYX 40 × 15 cm model is a soft ballistic insert designed to expand protective coverage. Before ordering, compare the panel dimensions with the internal measurements of your cummerbund or compatible pocket.   

Main Specifications:

• Brand – BRONYX;
• Product type – ballistic panel;
• Protection level – Level 2;
• Certification – DSTU;
• Material – Ultra-High-Molecular-Weight Polyethylene (UHMWPE);
• Size – 40 × 15 cm;
• Construction – soft ballistic panel;
• Color – black;
• Intended use – side and supplemental protection;
• Recommended installation – cummerbund or compatible pocket;
• Country of manufacture – Ukraine.

The BRONYX 40 × 15 cm ballistic panel provides additional side protection and is designed for installation inside a cummerbund or another compatible pocket. The flexible UHMWPE panel meets DSTU Level 2 protection requirements and is manufactured in Ukraine. Before ordering, verify the internal pocket dimensions to ensure a secure fit without movement during use.

Why Buy the BRONYX Ballistic Panel from TacMed?

At TacMed, you can purchase the BRONYX Level 2 Soft Ballistic Panel (40 × 15 cm). The product page provides current pricing, technical specifications, and ordering information. Before purchasing, you can confirm compatibility with your specific plate carrier cummerbund and verify whether the product includes one panel or a pair. Delivery is available throughout Ukraine. The TacMed catalog also includes plate carriers with side armor pockets, hard armor plates, trauma pads, medical pouches, and Individual First Aid Kits (IFAKs).